The tires are one of the most important elements of a car, since they keep the car in contact with the road. To avoid wear and tear it is important to replace the tires frequently from trusted Tire Dealer Sites but above all, avoid bad habits that shorten your life and endanger the safety of the driver and that of others.
1. Check the tire pressure regularly.
It is one of the key points to stop its deterioration. The most common problems are inflating them little or sub-inflation, which causes greater wear and tear on the side areas of the tread. But you also have to avoid inflating them too much, since it will wear down the central area of the wheel.
And how do I know what the correct pressure is? All vehicles indicate the tire pressure that their wheels require in the openings of their doors, in the back of the fuel rim or in the papers of the car .
2. Touch when parking or climbing the curbs.
Touching the curb with the tire is a reference used by many drivers to park, it is practical to tear the flank; as well as climbing curbs, better to do it at the lowest possible speed. If a small lump or tear appears it is important to replace it immediately, as the structure of the wheel has been affected.
3. Aggressive driving is a source of problems.
Braking, acceleration or cornering at high speed, as well as side and cornering will cause rapid wheel wear. The most serious consequence is that the alignment of the car can be damaged , causing uneven deterioration of the tire , leading to its change.
4. Rotate the tires? What is that?
To rotate the tires is to modify the position of the wheels of the car , avoiding uneven wear. Therefore, it is advisable to rotate them from 10,000 to 15,000 km, but it all depends on the use we make of the car.
5. Ignore steering wheel vibrations and irregular deterioration.
When the steering vibrates at a certain speed, it is possible that the balance of one of the tires is damaged or that the alignment has changed. The important thing is to take the car to the workshop when we get a clue through these symptoms. Checking both balancing and alignment can avoid breakdowns and major expenses.
6. Keep the winter wheels correctly.
The tires should be stored inflated and in an upright position if they are mounted on the tire. If, on the contrary, they are loose, they can remain stacked, but their positions must be changed at least once a month.
Many of these bad practices we do without realizing it, so with these simple tips you can detect any problem with the wheels in time and put a stop to bad habits and uses.
Modifying tire sizes on a car can have positive results in many aspects such as aesthetics, comfort and safety.
One of the main changes when thinking about changing the look and dynamic behavior of the car is the set of wheels and tires. And when you want to keep the original factory wheels, but get a change in the car, only the tires can be replaced, making changes to their size.
The width and profile of the tire can be changed, but it is important to keep in mind that a sudden change should not be made, as just as the change can bring benefits, it can also worsen the car's behavior. Below we separate the positives and negatives of these changes:
Width
Increasing the width of the tire ensures greater stability at high speed and grip when cornering and braking as there will be greater contact with the track. In contrast, it can increase fuel consumption and steering weight.
Profile
The profile, which is the side of the tire, represented by a percentage number in width, is a very important part. Reducing it gives the car more sporting behavior with more stability and grip, as there will be a smaller area to "bend" in turns and braking, making car steering and steering responses much faster. However, it is also the area responsible for absorbing impacts, so with the lower profile the wheel will be more susceptible to damage from potholes, sidewalks and other routine situations. The lower profile also reduces riding comfort.
How to make the change without exaggeration:
It is important not to overdo the changes, thus ensuring noticeable improvements in the car's behavior in a way that is not harmful changes. Keeping the total outside diameter equal or similar is very important, so when increasing the width by 1cm, for example, it is important to reduce the profile by 5%. There are outside diameter calculators easily found on the internet that can assist in this change. Keeping this number at or very close to the original will bring the benefits of the change made without causing an error in the speedometer and odometer reading, as well as impairing even the gearshift ratio of the vehicle.